forging hammer

Die forging equipment Electro-hydraulic die forging hammer is driven by hydraulic oil and does not contain nitrogen. It is mainly used in automobile forgings, tractor forgings, agricultural equipment forgings, oil and gas industry die forgings, power station die forgings and other closed die forgings.

Electro-hydraulic closed die forging hammers are mainly used in the mass production of various die forgings such as automobile forgings, tractor forgings, agricultural equipment forgings, oil and gas industry die forgings, power station die forgings and industrial forgings.

C41 series pneumatic hammers are widely used in general free forgings, such as drawing, upsetting, punching, chiseling, forging welding, bending, twisting, etc. It is also used for open and closed forging with pillow die.

Pneumatic Forging Hammer belongs to Open Die Forging Equipment, which relies on compressed air as a medium to do work and pushes the hammer head to move up and down to achieve the purpose of hammering the workpiece.

CNC hammer is a die forging equipment with high forging precision and digital control of striking energy.

Forging hammers, power hammers or pile drivers are used by many blacksmith workshops to make various forged trim pieces, simplifying the job of forming hot steel.

The full hydraulic free forging hammer realizes the blow by controlling the upper and lower oil pressure of the piston. The blowing force is large, the speed is fast, and the failure is less.

Pneumatic forging hammer is a free forging hammer. With a self-contained power hammer, you don’t need an external air supply or high pressure hose.

Electro-hydraulic hammer is a new type of forging equipment that is energy-saving and environmentally friendly. It is divided into single-arm electro-hydraulic hammer and double-arm electro-hydraulic hammer. The working principle is the same as that of electro-hydraulic power head, but the body is different from the original steam hammer. The guide of the hammer head is changed to “X” guide。

The Fully Hydraulic Open Die Forging Hammer has the advantages of sufficient energy, fast frequency, low failure rate, and can hover at any position. A Full Hydraulic Free Forging Hammer is suitable for producing various types of free forgings. Anyang Forging Company can also provide various kinds of forging manipulators.

A fully hydraulic open die forging hammer and forging manipulator are shown in this video.
In addition to providing this fully hydraulic open die forging hammer and forging manipulator, we can also convert the old open die hammer to fully hydraulic.

Fully hydraulic closed die forging hammer is driven by hydraulic oil without nitrogen gas, is mainly applied in many kinds of closed die forgings,such as automobile forgings,tractor forgings,agricultural equipment forgings, oil and gas industry die forgings, electrical power station die forgings and industrial forgings

The CNC full hydraulic die forging hammer is developed to meet the needs of the development of precision forgings. It overcomes the shortcomings of traditional forging equipment, the striking energy can be programmed to control, the precision of forgings is high, and it can form an automatic production line. It is these advantages that CNC It is inevitable for the full hydraulic die forging hammer to replace the traditional forging equipment.

CNC full hydraulic die forging hammer, also known as CNC electro-hydraulic hammer, program-controlled hammer or CNC hammer, can realize arbitrary adjustment of striking energy, prolong the working life of mold and hammer rod, and reduce vibration.

C61Y series full hydraulic open die forging hammer (C type) is an open die forging hammer with a C-shaped structure and three-side operation space. Its operating space is larger than the general hydraulic forging hammer and suits to produce all kinds of open die forgings.

fully hydraulic open die forging hammer is fully hydraulic drive open die forging hammer, there single arm type, arch type and bridge type etc structure type. The system principle is the below chamber of hammer rod piston connect the high pressure oil all the time,realize hit through control the upper and below oil pressure of piston of piston.It’s used for open die forging.

The Anyang FP power hammer is a self-contained hammer that does not require an air compressor and has a more solid casting frame.
A cast iron frame will never flex or warp. When you compare the weights of different hammers, you will find that the Anyang Power Hammer is among the heaviest. Despite being more expensive to manufacture, cast iron allows the designer to place mass and strength where they are needed.

This is a batch of power hammers produced for an Australian customer. These models of air hammers are suitable for blacksmiths, bladesmiths, and iron lovers. Anyang Forging Press’s power hammers are exported to more than 80 countries and regions in the world. Our power hammers are assembled and tested before shipping and packaged sturdy enough for long-distance shipping.

As a pre-forging device, Anyang pneumatic free forging hammer can replace steam hammer or other belt drop hammer. The most important point is that the investment is small and the return is high.

A full hydraulic forging hammer is a new type of forging equipment that is energy-saving and environmentally friendly. It is divided into a single-arm hydraulic forging hammer and a double-arm hydraulic forging hammer.

Hydraulic free forging hammers include full hydraulic free forging hammers and full hydraulic free forging hammers, both of which are widely accepted by modern free forging plants and are suitable for the production of various free forgings, such as shaft forgings, ring forgings, gear blanks, flanges, etc.

Pneumatic forging hammers are widely used in industrial free forging from 150kg to 2000kg. C41 series pneumatic hammers are widely used in general free forging work, such as drawing, upsetting, punching, chiseling, forging welding, bending, twisting, etc.

C61Y series full hydraulic open die forging hammer (C type) is an open die forging hammer with a C-shaped structure and three-side operation space.

Fully hydraulic closed die forging hammer is driven by hydraulic oil without nitrogen gas, is mainly applied in many kinds of closed die forgings,such as automobile forgings,tractor forgings,agricultural equipment forgings, oil and gas industry die forgings, electrical power station die forgings and industrial forgings

CNC hydraulic die forging hammers are hydraulic double-acting programmable forging hammers with HO-U structures, they comply with low carbon production, low vibration, high-efficiency production, etc. Can cooperate with Robot to build automatic forging line.

You may wonder about how forging power hammers work? In simple words, it works like a hammer, when the force is applied in the opposite direction it rapidly moves downwards, whatever object you hold under it.

The electro hydraulic forging hammer can save above 80-90% energy than steam hammer, which is the common understanding of personage of machinery industry. It doesn’t need boiler, removes smoke pollution, this improves worker’s working condition, so that the electro hydraulic forging is a product protecting environment, a replaced product of steam hammer.

​The internal parts of Anyang pneumatic forging hammer are forged steel and precision machined. There are no internal rubber air hoses to deteriorate over time. The drive belts are external to the machine for easy adjustment and away from harmful oil.

C66Y series full hydraulic free forging hammers are full hydraulic driven free forging hammers with single arm type, arch type, bridge type and other structural forms, which are used for free forging.

The CNC hydraulic forging hammer adopts an integrated U-shaped frame cast steel hammer body, which improves the strength of the hammer body and enables the hammer body to bear the eccentric forging force.