Pneumatic Forging Hammer: based on the time-proved designs of the old European hammers

Pneumatic forging hammer is a free forging hammer. With a self-contained power hammer, you don’t need an external air supply or high pressure hose.

C41 series air hammers are suitable for all kinds of free forging, such as stretching, upsetting, punching, shearing, forging welding, torsion, bending, etc. All kinds of open die forging can be performed by using the tire membrane.

We have been offering a versatile and multipurpose range forging hammer in different models and designs. We provide the range with striking features having maximum durability, stability and efficacy.

C41 series pneumatic forging hammer is a free forging hammer, which can carry out forging work such as elongation, roughing, punching, hot shearing, bending, torsion, forging and welding, and can also be used for forming forging with special-shaped anvils.

The air hammer drilling method refers to applying pressure to the drilling tool and rotating at the same time with the air hammer connected to the drill bit,
Apply high-frequency impact energy to the bit to carry out percussive rotary drilling at the bottom of the hole. This method is more efficient than general rotary drilling
High, less accidents in the hole and low engineering cost.

Blacksmith pneumatic power forging hammers are mainly used for forging, deep drawing, upsetting, punching, hot shearing, forging welding, bending, torsion and wedge forging.

C41 series pneumatic open die forging hammer includes 150 kg, 250 kg, 400 kg, 560 kg, 750 kg, 1000 kg, and 2000 kg. For the 2000 kg pneumatic open die forging hammer, which can be used for forging steel balls and other pre-forging works.

Anyang forging hammer is a free forging hammer. Using a self-contained power hammer eliminates the need for an external air supply or high pressure hose. It can be used for various free forgings, such as drawing, upsetting, stamping, hot shearing, forging welding, bending and torsion. It can be used for die forging with pressurized die, but cannot be used for closed die forging, because the impact energy of closed die forging is very large, and the main components such as hammer rod, guide rail, working cylinder, etc. will be damaged.

Pneumatic forging hammers are widely used in industrial free forging from 150kg to 2000kg. C41 series pneumatic hammers are widely used in general free forging work, such as drawing, upsetting, punching, chiseling, forging welding, bending, twisting, etc.

C41 series Anyang power forging hammers are mainly used for forging, deep drawing, upsetting, punching, hot shearing, forging welding, bending, torsion and wedge forging.