Pneumatic Forging Hammer / Power Forging Hammer (C41)

Power Forging Hammer (Pneumatic Forging Hammers) from 150kg to 2000kg is widely used in industrial open die forging. The C41 series pneumatic hammer is widely used for drawing out, upsetting, punching, chiseling, forging welding, bending, and twisting. With bolster dies, it is also used for open-type close forging.

Advantages of Pneumatic Forging Hammer（Air Forging Hammer, Power Forging Hammer）:
Simple structure and convenient operation!
Low cost and easy maintenance!
High production efficiency and strong process adaptability!
Production of small and medium forgings

You may wonder about how forging power hammers work? In simple words, it works like a hammer, when the force is applied in the opposite direction it rapidly moves downwards, whatever object you hold under it.

C41 series Pneumatic Forging Hammer is a kind of free forging equipment, which is flexible in operation and widely used in the production of small and medium-sized forgings.

C41 series pneumatic open die forging hammer includes 150 kg, 250 kg, 400 kg, 560 kg, 750 kg, 1000 kg, and 2000 kg. For the 2000 kg pneumatic open die forging hammer, which can be used for forging steel balls and other pre-forging works.

​The internal parts of Anyang pneumatic forging hammer are forged steel and precision machined. There are no internal rubber air hoses to deteriorate over time. The drive belts are external to the machine for easy adjustment and away from harmful oil.

Anyang pneumatic forging hammer from 150kg to 2000kg is widely used in industrial open die forging.C41 series pneumatic hammer is widely used for general open die forging works, such as drawing-out, upsetting, punching, chiseling, forging welding, bending, and twisting.

Blacksmith forging hammer is a kind of free forging equipment. There are two cylinders. The compression cylinder compresses the air, sends it into the working cylinder through the distribution valve, and pushes the piston together with the hammer head to move up and down for hammering.

Anyang Blacksmith Power Hammer (9kg to 110kg) is an independent pneumatic power hammer. The design is based on the time-proven design of old European hammers, many of which are still in use today.

Air hammer forged steel balls are produced by air hammer forging, first forging and then quenching.

The split-type large air hammer is composed of main components such as body, compression piston, transmission, hammer rod lead, hammer rod, anvil and control. Reasonable structure, flexible operation, stable performance and beautiful appearance.

Pneumatic hammer for forging Pneumatic hammer is widely used in general forging projects, such as drawing, upsetting, punching, chiseling, forging, welding, bending, twisting, etc., and also used for forging of load-bearing dies.

Anyang forging hammer is a free forging hammer. Using a self-contained power hammer eliminates the need for an external air supply or high pressure hose. It can be used for various free forgings, such as drawing, upsetting, stamping, hot shearing, forging welding, bending and torsion. It can be used for die forging with pressurized die, but cannot be used for closed die forging, because the impact energy of closed die forging is very large, and the main components such as hammer rod, guide rail, working cylinder, etc. will be damaged.

The air hammer drilling method refers to applying pressure to the drilling tool and rotating at the same time with the air hammer connected to the drill bit,
Apply high-frequency impact energy to the bit to carry out percussive rotary drilling at the bottom of the hole. This method is more efficient than general rotary drilling
High, less accidents in the hole and low engineering cost.