J58K series screw press hot forging exported to Türkiye

The electric screw press is a new type of forging equipment evolved by optimizing the transmission system on the basis of the principle of the friction press.

J58K series electric screw press / suitable for all kinds of precision forging, sizing, precision pressing, leveling and other processes.

Electric screw press is an energy-saving precision forging press equipment. No mechanical transmission, direct drive by servo motor, high transmission efficiency, low failure rate, fast motor speed, large torque, digital control of energy release, and can meet various process requirements for forging strikes.

Electric screw press is a forging equipment used for hot forging, precision forging and finishing. Electric screw presses are often used in the pressure welding process of stainless steel double bottom pots, and the precision forging of titanium alloy blades and other blades.

The Scope and Characteristics of the Screw Press Forging

Electric screw presses are suitable for forging various die forgings, such as turbine blades and special bolts in the aviation industry, engine valves, differential gears, connecting rods, claw poles in the automotive industry, and surgical forceps in the medical industry. With the development of science and technology, various industries have higher and higher requirements for the precision of die forgings. Compared with traditional die forging equipment, an electric screw press is ideal equipment for producing precision die forgings.

Electric screw presses are equipment used in the forging industry, which can be used not only for hot forging, but also for fine forging and finishing.

This production line includes a 1000Kw induction furnace, a J58K-1600 CNC electric screw press, a 400t trimming press, a D51-800 ring rolling machine, and two KUKA robots. It is mainly used to manufacture petroleum pipes. Production technology, equipment, and molds are provided by Anyang Forging Press Numerical Control Equipment Co., Ltd, with a production line output of 30 pieces per hour.

Electric power press is designed specially according to the requirements of refractory material pressed technology. It has light and heavy sequence blow and is an ideal device for pressing brick.

The direct-drive electric screw press is a general-purpose press with a compact structure, which is widely used in punching, blanking and forming processes.

Electric screw press is a type of press machine in which the ram is driven up and down by a screw,which have the advantages of small volume,short of transmission chain,easy operation.

J58K series electric screw presses are suitable for various precision forging, sizing, precision pressing, leveling and other processes.

Electric screw press is a forging equipment tailored for the forging industry of forging steel, non-ferrous metal forging, and titanium alloy forging according to the characteristics of the forging industry.

The electric screw press has the advantages of simple structure, easy adjustment and maintenance, no bottom dead center of the slider, convenient mold design, and high precision of forgings.

The J58K series electric screw press can adjust the striking energy according to the molding needs, reduce the mechanical stress and thermal stress of the mold, and prolong the life of the mold. Because of its low slider speed, it has unique advantages in forging of non-ferrous metals such as aluminum alloy and copper.

The electric screw press adopts gear transmission mode. The characteristics of this transmission mode are: special motor, high speed and low torque, different tonnage presses are equipped with special motors of different powers, easy to replace motor faults, simple maintenance, and good motor performance. Guide bush wear is not affected. After years of continuous improvement and innovation, the efficiency of electric screw presses has been greatly improved

1. According to the forging method: warm forging, hot forging, cold forging of thin forgings, powder metallurgy forging, straightening processing, combined casting, and forging.
2. According to forging material: all steel including stainless steel, aluminum alloy, titanium, magnesium, brass, copper, etc.

Electric screw press is not only a forging equipment with strong process applicability, but also an environmentally friendly and energy-saving precision forming equipment

Anyang Forging Press is a new generation of intelligent electric screw press with more intelligent control system, better stiffness and strength, and better forging accuracy.

J58K series electric screw press has strong technological adaptability, remarkable energy saving and environmental protection, and high degree of automation. It is not only suitable for hot forging, but also suitable for precision forging and finishing; at the same time, it is suitable for the welding process of stainless steel double bottom pot, and the precision forging of titanium alloy blades or other blades.