J58K series electric screw press features and applications

1. According to the forging method: warm forging, hot forging, cold forging of thin forgings, powder metallurgy forging, straightening processing, combined casting, and forging.
2. According to forging material: all steel including stainless steel, aluminum alloy, titanium, magnesium, brass, copper, etc.

J58K series electric screw press has strong technological adaptability, remarkable energy saving and environmental protection, and high degree of automation. It is not only suitable for hot forging, but also suitable for precision forging and finishing; at the same time, it is suitable for the welding process of stainless steel double bottom pot, and the precision forging of titanium alloy blades or other blades.

The J58K series electric screw press can adjust the striking energy according to the molding needs, reduce the mechanical stress and thermal stress of the mold, and prolong the life of the mold. Because of its low slider speed, it has unique advantages in forging of non-ferrous metals such as aluminum alloy and copper.

The electric screw press adopts gear transmission mode. The characteristics of this transmission mode are: special motor, high speed and low torque, different tonnage presses are equipped with special motors of different powers, easy to replace motor faults, simple maintenance, and good motor performance. Guide bush wear is not affected. After years of continuous improvement and innovation, the efficiency of electric screw presses has been greatly improved

Electric screw presses are highly rated by customers all over the world due to their fast processing speed and long service life. Besides, our company can supply various specifications of electric screw presses according to their requirements.

Like a forging hammer, an electric screw press takes rotational energy from the flywheel and converts it into linear motion of the plunger. It can be used to forge a variety of metals and alloys, including steel, titanium, aluminum, and brass, as well as many other specialty materials, such as those used in the aerospace and medical industries.

J58K series electric screw press / suitable for all kinds of precision forging, sizing, precision pressing, leveling and other processes.

Why use forging to produce hooks?
Lifting hooks can be used for a variety of lifting, rigging, towing, pulling, and securing.
In the lifting and rigging industry, hooks are always used to transport components from one place to another. Therefore, the hook must be strong and able to withstand high weights.

Electric screw press is not only a forging equipment with strong process applicability, but also an environmentally friendly and energy-saving precision forming equipment

Anyang Forging Press Company has designed complete forging “systems” that are based on the user’s technical requirements. Our goal is to create complete forging systems that deliver reliability, protect the environment, labor and energy efficiency are reliable, and above all, produce the highest quality forgings possible.

Electric screw press is widely used for forging parts in the field of machine, automobile, hardware, coal machinery and aerospace, it can be used for die forging, precision forging, trimming, calibration processes, it is one kind of popular forging equipment.

The direct-drive electric screw press is a general-purpose press with a compact structure, which is widely used in punching, blanking and forming processes.

The Scope and Characteristics of the Screw Press Forging

Electric screw presses are suitable for forging various die forgings, such as turbine blades and special bolts in the aviation industry, engine valves, differential gears, connecting rods, claw poles in the automotive industry, and surgical forceps in the medical industry. With the development of science and technology, various industries have higher and higher requirements for the precision of die forgings. Compared with traditional die forging equipment, an electric screw press is ideal equipment for producing precision die forgings.

The electric screw press is only lost in the blow molding process, not consumed in feeding, picking bricks, and cleaning the mold. Anyone can do it in such a short time with one key operation. Fully automatic digital simulation of human strike process

The screw press is a machine that can convert the rotational energy of the flywheel into the up and down motion of the mold to do work. The origin of its earliest structure comes from the ancient printing press. Because the rotational energy can bring great energy, but the rotational energy of the flywheel must pass the screw device (screw nut) to transmit the force to the mold, which is affected by the action force and the reaction force, making the fuselage, screw, nut, etc. Force-sensitive parts are also affected by the closing force, so screw presses are especially suitable for high-energy forming machines, but the force is limited.

Electric screw presses are equipment used in the forging industry, which can be used not only for hot forging, but also for fine forging and finishing.