Hydraulic Open Die Forging Press (Y13)

The air hammer drilling method refers to applying pressure to the drilling tool and rotating at the same time with the air hammer connected to the drill bit,
Apply high-frequency impact energy to the bit to carry out percussive rotary drilling at the bottom of the hole. This method is more efficient than general rotary drilling
High, less accidents in the hole and low engineering cost.

A fully hydraulic open die forging hammer and forging manipulator are shown in this video.
In addition to providing this fully hydraulic open die forging hammer and forging manipulator, we can also convert the old open die hammer to fully hydraulic.

Both forging hammers / forging presses for art blacksmithing and for industrial open die forging and drop forgings/ closed die forgings.

Pneumatic Forging Hammer is suitable for all kinds of free forging: such as stretching, upsetting, punching, shearing, forging welding, torsion, bending, etc., all kinds of open die forging can be performed by using a pad die.

This is a small hydraulic press built by Anyang Forging Press. It’s slow, but if you’re patient enough, it can actually forge a steel forging well.

You may wonder about how forging power hammers work? In simple words, it works like a hammer, when the force is applied in the opposite direction it rapidly moves downwards, whatever object you hold under it.

Pneumatic hammer for forging Pneumatic hammer is widely used in general forging projects, such as drawing, upsetting, punching, chiseling, forging, welding, bending, twisting, etc., and also used for forging of load-bearing dies.

Power Forging Hammer is a kind of forging equipment, which has the functions of shearing, punching, forging, and so on.

C41 series pneumatic forging hammer is a free forging hammer, which can carry out forging work such as elongation, roughing, punching, hot shearing, bending, torsion, forging and welding, and can also be used for forming forging with special-shaped anvils.

C61Y series full hydraulic open die forging hammer (C type) is an open die forging hammer with a C-shaped structure and three-side operation space. Its operating space is larger than the general hydraulic forging hammer and suits to produce all kinds of open die forgings.

C41 series Anyang power forging hammers are mainly used for forging, deep drawing, upsetting, punching, hot shearing, forging welding, bending, torsion and wedge forging.

Hydraulic forging presses are mainly used for refueling and feeding applications in various industries. The hydraulic forging presses we offer are safety tested and come with a long-term warranty.