Hot Forging Screw Press Manufacturer Equipment For Sale Price In China

A screw press, like a forging hammer, is a machine with limited energy. It takes rotational energy from the flywheel and converts it into linear motion of the plunger.

The Screw Press is a kind of die forging equipment and belongs to hot die forging equipment. It has a wide range of applications and has the advantages of low noise, and it can form a modern forging production line.

Electric screw press is an energy-saving precision forging press equipment. No mechanical transmission, direct drive by servo motor, high transmission efficiency, low failure rate, fast motor speed, large torque, digital control of energy release, and can meet various process requirements for forging strikes.

A new intelligent production line has been launched by Anyang Forging Press after years of discussion and research and development – an intelligent forging production line with a CNC electric screw press as the primary forging equipment.

J58K series electric screw press / suitable for all kinds of precision forging, sizing, precision pressing, leveling and other processes.

Electric screw press is a forging equipment tailored for the forging industry of forging steel, non-ferrous metal forging, and titanium alloy forging according to the characteristics of the forging industry.

J58K series electric screw press has strong technological adaptability, remarkable energy saving and environmental protection, and high degree of automation. It is not only suitable for hot forging, but also suitable for precision forging and finishing; at the same time, it is suitable for the welding process of stainless steel double bottom pot, and the precision forging of titanium alloy blades or other blades.

The electric screw press adopts gear transmission mode. The characteristics of this transmission mode are: special motor, high speed and low torque, different tonnage presses are equipped with special motors of different powers, easy to replace motor faults, simple maintenance, and good motor performance. Guide bush wear is not affected. After years of continuous improvement and innovation, the efficiency of electric screw presses has been greatly improved

The direct-drive electric screw press is a general-purpose press with a compact structure, which is widely used in punching, blanking and forming processes.

The electric screw press is a new type of forging equipment evolved by optimizing the transmission system on the basis of the principle of the friction press.

The electric screw press has the advantages of simple structure, easy adjustment and maintenance, no bottom dead center of the slider, convenient mold design, and high precision of forgings.

This production line includes a 1000Kw induction furnace, a J58K-1600 CNC electric screw press, a 400t trimming press, a D51-800 ring rolling machine, and two KUKA robots. It is mainly used to manufacture petroleum pipes. Production technology, equipment, and molds are provided by Anyang Forging Press Numerical Control Equipment Co., Ltd, with a production line output of 30 pieces per hour.

The electric screw press can be used not only for hot forging, but also for precision forging and finishing; it is not only suitable for the pressure welding process of stainless steel double bottom pot, but also for precision forging of titanium alloy blades and other blades.

Electric screw press is not only a forging equipment with strong process applicability, but also an environmentally friendly and energy-saving precision forming equipment

Electric screw presses are equipment used in the forging industry, which can be used not only for hot forging, but also for fine forging and finishing.