Fully Hydraulic Open Die Forging Hammer (C66Y)

The Blacksmith Power Hammer is a type of free-forging machine. The compression cylinder compresses the air, sends it into the working cylinder through the distribution valve, and pushes the piston together with the hammer to move up and down to play the hammering effect. Flexible operation, widely used in the production of small and medium forgings.

Hydraulic forging machines are becoming more and more important to any blacksmith shop. Often crafted by hand, this relatively small machine allows a blacksmith to perform many of the same operations as a power hammer, while adding more control and expanding what one can do with hot metal.

The double-arm (arch type) free forging electro-hydraulic hammer converts the potential energy of the hammer head into the kinetic energy of the hammer head, thereby striking the forging and performing work.

C66Y series full hydraulic free forging hammers are full hydraulic driven free forging hammers with single arm type, arch type, bridge type and other structural forms, which are used for free forging.

Electro-hydraulic free forging hammers are widely accepted by modern free forging plants and are suitable for the production of various free forgings, such as shaft forgings, ring forgings, gear blanks, flanges, etc.

Electro-hydraulic hammer is a new type of forging equipment that is energy-saving and environmentally friendly. It is divided into single-arm electro-hydraulic hammer and double-arm electro-hydraulic hammer. The working principle is the same as that of electro-hydraulic power head, but the body is different from the original steam hammer. The guide of the hammer head is changed to “X” guide。

Anyang Forging Press C66Y series arch free forging electro-hydraulic hammer is supported by two left and right fuselage with arch, as the name suggests, arch electro-hydraulic hammer. It consists of power head, anvil, fuselage, hydraulic station and other parts.

​The internal parts of Anyang pneumatic forging hammer are forged steel and precision machined. There are no internal rubber air hoses to deteriorate over time. The drive belts are external to the machine for easy adjustment and away from harmful oil.

Fully Hydraulic Open Die Forging Hammer
Hydraulic C type Open Die Forging Hammer

How to disassemble the Pneumatic Forging Hammer?
Pneumatic Forging Hammer has the advantages of easy operation, saving production space, low maintenance cost, and quick investment. Therefore, it is the basic forging equipment in the forging industry, and the market has a very large amount. In the process of use, it will inevitably encounter problems such as relocation and machine relocation, or the need to replace the main spare parts. How should the Pneumatic Forging Hammer be disassembled when the air forging hammer is overhauled?

It includes a general hydraulic free forging press and a special ring rolling blanking hydraulic press. The general hydraulic free forging press is mainly used in metal open die forging, also used for bolster die forging,with functions of fast forging, normal forging and pressure keeping, etc, satisfying various forging technical requirements, such as upsetting, drawing out, piercing, saddle forging, bending, offset forging, etc.

The hydraulic press is generally composed of three parts: the machine (host), the power system and the hydraulic control system. It is often used in the pressing process and press forming process, such as: forging, stamping, cold extrusion, straightening, bending, flanging, sheet drawing, powder Metallurgy, press fitting, etc.

A forging press (sometimes simply called a press) is a machine that uses a vertical plunger to gradually apply greater force to a die. Forging presses do not repeatedly strike exposed parts like a power forging hammer—forging presses slowly shape a piece of metal and create uniform plastic deformation across the material.

C66Y series fully hydraulic open die forging hammer is fully hydraulic drive open die forging hammer, the single-arm type, arch type, and bridge type, etc structure type. The system principle is the below chamber of hammer rod piston connect the high-pressure oil all the time, realize hit through control the upper and below oil pressure of piston. It’s used for open die forging. The fully hydraulic open die forging hammer hitting is powerful and faster, less malfunction, the ram can hang up at any position. It is suitable to produce all kinds of open die forgings.

The split-type large air hammer is composed of main components such as body, compression piston, transmission, hammer rod lead, hammer rod, anvil and control. Reasonable structure, flexible operation, stable performance and beautiful appearance.

People call blacksmithing one of the hardest techniques. However, each product of this purely manual exercise is made through thousands of trials. The product has high density and is very durable. Sometimes the surface is smooth like a mirror. The industry of iron fighting is withdrawing from the stage of history, and blacksmiths have also been replaced by machines. The air hammer is one of such machines. It expresses the spirit of iron fighting and can stand the test of hard work.