C41 Series Pneumatic Forging Hammer Manufacturer in Indonesia

Pneumatic Hammer, a kind of free forging machine. Air Hammer Forging Machine The compression cylinder compresses the air and sends it into the working cylinder through the distribution valve, pushing the piston together with the hammer head to move up and down for hammering.

As a pre-forging device, Anyang pneumatic free forging hammer can replace steam hammer or other belt drop hammer. The most important point is that the investment is small and the return is high.

You may wonder about how forging power hammers work? In simple words, it works like a hammer, when the force is applied in the opposite direction it rapidly moves downwards, whatever object you hold under it.

Our pneumatic forging hammers are used in many industrial applications. Strict verification of many parameters before delivery.

Pneumatic forging hammer is a free forging hammer. With a self-contained power hammer, you don’t need an external air supply or high pressure hose.

Power hammers are mechanical forging hammers that use a non-muscular power source to raise the hammer preparatory to striking, and accelerate it onto the work being hammered. Also called “Open Die Power Forging Hammers.”

Anyang pneumatic forging hammers are self-contained pneumatic power hammers. The design is based on the time-proved designs of the old European hammers many of which are still in use today. With a self-contained power hammer, you require no external air supply or high-pressure hoses.

Anyang pneumatic forging hammer from 150kg to 2000kg is widely used in industrial open die forging.C41 series pneumatic hammer is widely used for general open die forging works, such as drawing-out, upsetting, punching, chiseling, forging welding, bending, and twisting.

This is a 560kg Pneumatic Forging Hammer made by Anyang Forging Press Company. We have produced many of these large Pneumatic Forging Hammers for Indian customers.

The air hammer drilling method refers to applying pressure to the drilling tool and rotating at the same time with the air hammer connected to the drill bit,
Apply high-frequency impact energy to the bit to carry out percussive rotary drilling at the bottom of the hole. This method is more efficient than general rotary drilling
High, less accidents in the hole and low engineering cost.

Pneumatic Forging Hammer is suitable for all kinds of free forging: such as stretching, upsetting, punching, shearing, forging welding, torsion, bending, etc., all kinds of open die forging can be performed by using a pad die.

Pneumatic forging hammers are widely used in industrial free forging from 150kg to 2000kg. C41 series pneumatic hammers are widely used in general free forging work, such as drawing, upsetting, punching, chiseling, forging welding, bending, twisting, etc.

Power Forging Hammer (Pneumatic Forging Hammers) from 150kg to 2000kg is widely used in industrial open die forging. The C41 series pneumatic hammer is widely used for drawing out, upsetting, punching, chiseling, forging welding, bending, and twisting. With bolster dies, it is also used for open-type close forging.