C41 series large pneumatic forging hammer produced for forging in Pakistan

Anyang pneumatic forging hammers are self-contained pneumatic power hammers. The design is based on the time-proved designs of the old European hammers many of which are still in use today. With a self-contained power hammer, you require no external air supply or high-pressure hoses.

Power hammers are mechanical forging hammers that use a non-muscular power source to raise the hammer preparatory to striking, and accelerate it onto the work being hammered. Also called “Open Die Power Forging Hammers.”

Anyang forging hammer is a free forging hammer. Using a self-contained power hammer eliminates the need for an external air supply or high pressure hose. It can be used for various free forgings, such as drawing, upsetting, stamping, hot shearing, forging welding, bending and torsion. It can be used for die forging with pressurized die, but cannot be used for closed die forging, because the impact energy of closed die forging is very large, and the main components such as hammer rod, guide rail, working cylinder, etc. will be damaged.

How to disassemble the Pneumatic Forging Hammer?
Pneumatic Forging Hammer has the advantages of easy operation, saving production space, low maintenance cost, and quick investment. Therefore, it is the basic forging equipment in the forging industry, and the market has a very large amount. In the process of use, it will inevitably encounter problems such as relocation and machine relocation, or the need to replace the main spare parts. How should the Pneumatic Forging Hammer be disassembled when the air forging hammer is overhauled?

Power hammers are mechanically driven forging tools that use hydraulic oil to lift the hammer and strike, helping the blacksmith to complete more advanced blacksmithing projects faster.

Pneumatic hammer for forging Pneumatic hammer is widely used in general forging projects, such as drawing, upsetting, punching, chiseling, forging, welding, bending, twisting, etc., and also used for forging of load-bearing dies.

Forging hammers, power hammers or pile drivers are used by many blacksmith workshops to make various forged trim pieces, simplifying the job of forming hot steel.

C41 series air hammers are suitable for all kinds of free forging, such as stretching, upsetting, punching, shearing, forging welding, torsion, bending, etc. All kinds of open die forging can be performed by using the tire membrane.

Anyang forging equipment C41 blacksmith air hammer is suitable for free forging of various shapes of parts in the forging workshop. Such as extension, thickening, hot shearing, forging, twisting and bending. Various die forgings can be performed by using the open pad die. It is widely used in hardware tools, medical equipment, gold and silver processing, manufacturing, agricultural machinery and copper pipe factories and other industries.

The Blacksmith Power Hammer is a type of free-forging machine. The compression cylinder compresses the air, sends it into the working cylinder through the distribution valve, and pushes the piston together with the hammer to move up and down to play the hammering effect. Flexible operation, widely used in the production of small and medium forgings.

Anyang pneumatic forging hammers are self-contained pneumatic power hammers. The design is based on the time-proved designs of the old European hammers many of which are still in use today. With a self-contained power hammer, you require no external air supply or high-pressure hoses.

Anyang pneumatic forging hammer from 150kg to 2000kg is widely used in industrial open die forging.C41 series pneumatic hammer is widely used for general open die forging works, such as drawing-out, upsetting, punching, chiseling, forging welding, bending, and twisting.

C41 series Anyang power forging hammers are mainly used for forging, deep drawing, upsetting, punching, hot shearing, forging welding, bending, torsion and wedge forging.

Pneumatic forging hammers are widely used in industrial free forging from 150kg to 2000kg. C41 series pneumatic hammers are widely used in general free forging work, such as drawing, upsetting, punching, chiseling, forging welding, bending, twisting, etc.

Blacksmith pneumatic power forging hammers are mainly used for forging, deep drawing, upsetting, punching, hot shearing, forging welding, bending, torsion and wedge forging.