C41-560kg Industrial Pneumatic Forging Hammer Features and Applications

The air hammer drilling method refers to applying pressure to the drilling tool and rotating at the same time with the air hammer connected to the drill bit,
Apply high-frequency impact energy to the bit to carry out percussive rotary drilling at the bottom of the hole. This method is more efficient than general rotary drilling
High, less accidents in the hole and low engineering cost.

Anyang pneumatic forging hammers are self-contained pneumatic power hammers. The design is based on the time-proved designs of the old European hammers many of which are still in use today. With a self-contained power hammer, you require no external air supply or high-pressure hoses.

C41 series pneumatic open die forging hammer includes 150 kg, 250 kg, 400 kg, 560 kg, 750 kg, 1000 kg, and 2000 kg. For the 2000 kg pneumatic open die forging hammer, which can be used for forging steel balls and other pre-forging works.

Pneumatic hammer forging machine is a free forging equipment, the whole machine is suitable for small manufacturing and repair industries.

Our pneumatic forging hammers are used in many industrial applications. Strict verification of many parameters before delivery.

Anyang forging hammer is a free forging hammer. Using a self-contained power hammer eliminates the need for an external air supply or high pressure hose. It can be used for various free forgings, such as drawing, upsetting, stamping, hot shearing, forging welding, bending and torsion. It can be used for die forging with pressurized die, but cannot be used for closed die forging, because the impact energy of closed die forging is very large, and the main components such as hammer rod, guide rail, working cylinder, etc. will be damaged.

Power Forging Hammer (Pneumatic Forging Hammers) from 150kg to 2000kg is widely used in industrial open die forging. The C41 series pneumatic hammer is widely used for drawing out, upsetting, punching, chiseling, forging welding, bending, and twisting. With bolster dies, it is also used for open-type close forging.

Pneumatic hammer for forging Pneumatic hammer is widely used in general forging projects, such as drawing, upsetting, punching, chiseling, forging, welding, bending, twisting, etc., and also used for forging of load-bearing dies.

As a pre-forging device, Anyang pneumatic free forging hammer can replace steam hammer or other belt drop hammer. The most important point is that the investment is small and the return is high.

C41 series pneumatic forging hammer is mainly used for free forging. Such as stretching, upsetting, punching, hot shearing, forging welding, bending and torsion work, it can also be used for fetal membrane forging.

People call blacksmithing one of the hardest techniques. However, each product of this purely manual exercise is made through thousands of trials. The product has high density and is very durable. Sometimes the surface is smooth like a mirror. The industry of iron fighting is withdrawing from the stage of history, and blacksmiths have also been replaced by machines. The air hammer is one of such machines. It expresses the spirit of iron fighting and can stand the test of hard work.

Forging hammers, power hammers or pile drivers are used by many blacksmith workshops to make various forged trim pieces, simplifying the job of forming hot steel.

C41 series pneumatic forging hammer is a free forging hammer, which can carry out forging work such as elongation, roughing, punching, hot shearing, bending, torsion, forging and welding, and can also be used for forming forging with special-shaped anvils.