400KG Anyang Power Forging Hammer / Pneumatic Forging Hammer For Sale

Blacksmith pneumatic power forging hammers are mainly used for forging, deep drawing, upsetting, punching, hot shearing, forging welding, bending, torsion and wedge forging.

The air hammer drilling method refers to applying pressure to the drilling tool and rotating at the same time with the air hammer connected to the drill bit,
Apply high-frequency impact energy to the bit to carry out percussive rotary drilling at the bottom of the hole. This method is more efficient than general rotary drilling
High, less accidents in the hole and low engineering cost.

Power Forging Hammer (Pneumatic Forging Hammers) from 150kg to 2000kg is widely used in industrial open die forging. The C41 series pneumatic hammer is widely used for drawing out, upsetting, punching, chiseling, forging welding, bending, and twisting. With bolster dies, it is also used for open-type close forging.

Pneumatic forging hammers are widely used in industrial free forging from 150kg to 2000kg. C41 series pneumatic hammers are widely used in general free forging work, such as drawing, upsetting, punching, chiseling, forging welding, bending, twisting, etc.

Anyang forging hammer is a free forging hammer. Using a self-contained power hammer eliminates the need for an external air supply or high pressure hose. It can be used for various free forgings, such as drawing, upsetting, stamping, hot shearing, forging welding, bending and torsion. It can be used for die forging with pressurized die, but cannot be used for closed die forging, because the impact energy of closed die forging is very large, and the main components such as hammer rod, guide rail, working cylinder, etc. will be damaged.

Power pneumatic forging hammer is a self-contained pneumatic power hammer. The design is based on the tried and true design of old European pneumatic hammers, many of which are still in use today. With a self-contained power hammer, you don’t need an external air supply or high pressure hose.

This is a 560kg Pneumatic Forging Hammer made by Anyang Forging Press Company. We have produced many of these large Pneumatic Forging Hammers for Indian customers.

C41 series pneumatic forging hammer is mainly used for free forging. Such as stretching, upsetting, punching, hot shearing, forging welding, bending and torsion work, it can also be used for fetal membrane forging.

Anyang pneumatic forging hammers are self-contained pneumatic power hammers. The design is based on the time-proved designs of the old European hammers many of which are still in use today. With a self-contained power hammer, you require no external air supply or high-pressure hoses.

C41 series air hammers are suitable for all kinds of free forging, such as stretching, upsetting, punching, shearing, forging welding, torsion, bending, etc. All kinds of open die forging can be performed by using the tire membrane.

The split-type large air hammer is composed of main components such as body, compression piston, transmission, hammer rod lead, hammer rod, anvil and control. Reasonable structure, flexible operation, stable performance and beautiful appearance.

C41 series Pneumatic Forging Hammer is a kind of free forging equipment, which is flexible in operation and widely used in the production of small and medium-sized forgings.

​The internal parts of Anyang pneumatic forging hammer are forged steel and precision machined. There are no internal rubber air hoses to deteriorate over time. The drive belts are external to the machine for easy adjustment and away from harmful oil.

Pneumatic Hammer, a kind of free forging machine. Air Hammer Forging Machine The compression cylinder compresses the air and sends it into the working cylinder through the distribution valve, pushing the piston together with the hammer head to move up and down for hammering.